, , , ,

NETGEAR FS728TP ProSAFE 24-Port Smart Managed Rackmount Fast Ethernet PoE Switch w/ 2 x 1GbE RJ45/SFP Combo Ports (192W)

Availability:

Out of stock

SKU: NG-FS728TP
MFR SKU: FS728TP
Categories: , , , ,

  • All 24 10/100 Ports with PoE deliver data & power over one cable.
  • 4 Gigabit ports for high speed connections.
  • Easy to manage via web-based interface.
  • Facilitates easy deployment of wireless, IP telephony & surveillance devices.
  • 2 SFP slots optional Fibre connectivity & 2 Combo (Fibre/Copper) ports.
  • Advanced features include: 802.1x, ACLs, Rate limiting, DSCP/TOS-based prioritisation, IGMP Snooping
  • Supports SNMP v1, v2, v3 Network Management Protocol.

QAR 1,599

Out of stock

Order now & Get it delivered Today!!

 
Network Protocol and Standards CompatibilityIEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab 1000BASE-T
IEEE 802.3z 1000BASE-X
IEEE 802.3x full-duplex flow control
IEEE 802.3af (Power over Ethernet)
Power SupplyPower Consumption: 225W maximum
100-240VAC/50-60 Hz universal input
PoE Budget: 192W
Network Ports24 10/100 Mbps auto sensing Fast Ethernet
2 10/100/1000 Mbps auto-sensing Gigabit Ethernet switching ports (RJ-45)
2 Combo Gigabit Copper/SFP slots
Physical SpecificationsDimensions: (W x D x H): 440 x 257 x 43 mm (17.3 x 8.1 x 1.6 in.)
Weight: 4.0 kg (8.8 lb)
Electromagnetic EmissionsCE mark, commercial
FCC Part 15 Class A
VCCI Class A
C-Tick
Environmental SpecificationsOperating temperature: 32 to 104° F (0 to 50° C)
Storage temperature: -4 to 158° F (-20 to 70° C)
Operating humidity: 90% maximum relative humidity, non-condensing
Storage humidity: 95% maximum relative humidity, non-condensing
Operating altitude: 10,000 ft (3,000 m) maximum
Storage altitude: 10,000 ft (3,000 m) maximum
LEDsPer port: (10/100 and Gigabit): Link/ Activity, Speed
Per device: Power
Per PoE ports: PoE Power, PoE fault
Electromagnetic ImmunityEN 55024
SafetyCE mark, commercial
– cUL IEC950/EN60950 Administrative Switch Management:
– IEEE 802.1Q Static VLAN (128 groups, Static)
– IEEE 802.1p Class of Service (CoS)
– Port-based QoS
– DSCP-based QoS
– IEEE802.3ad Link Aggregation (manual or LACP)
– IEEE 802.1D Spanning Tree Protocol
– SNMP v1, v2c, v3
– RFC 1213 MIB II
– RFC 1643 Ethernet Interface MIB
– RFC 1493 Bridge MIB
– RMON group 1, 2, 3, 9
– RFC 2131 DHCP client
– IEEE 802.1x
– Port-based security by locked MAC addresses
– MAC ACL
– Storm control for broadcast, multicast and unknown unicast packets
– IGMP Snooping v1/v2
– Port-based ingress rate limiting
– SNTP
– Port Mirroring Support
– Web-based configuration
– Configuration Backup/Restore
– Password Access Control
– RADIUS Support
– TACACS+ Support
– Syslog
– Firmware upgradeable
Performance Specifications– Forwarding modes: Store-and-forward
– Bandwidth: 12.8 Gbps
– Network latency: <20Ìs for 64-byte frames in store-and forward mode for 100 Mbps to 100 Mbps transmission
– Buffer memory: 3 Mb per system
– Address database size: 8,000 media access control (MAC) addresses per system
– Addressing: 48-bit MAC address
– Mean Time Between Failure (MTBF): 300,000 hours (~34 years)
Modules– AGM731F 1000BASE-SX SFP Module
– AGM732F 1000BASE-LX SFP Module
– AGM733 1000BASE-LZ SFP Module
System Requirements
  • Category 5 network cables
  • Network card for each PC
  • Network software (e.g., Windows)
  • Web Browser (e.g., Internet Explorer 5.0 or higher, Netscape 6.0 or higher)
Package Contents
  • 24-port Smart Switch with Gigabit Ports FS728TP
  • Rubber footpads
  • Power cord
  • Rack-mount kit
  • Resource CD
  • Installation guide
  • Warranty/Support information card
  • Category 5 cable